To Next PageTo Next PageWhy Panasonic NA-F90H2 does not run at all?
If your Panasonic Washer doesn't run, first ensure there's no power failure. Check the power fuse or breaker, and make sure the power plug is fully inserted. Also, verify the power switch is pressed, the water faucet is on, and the [Start/Pause] button is activated. Lastly, confirm the machine isn't programmed under the [Reserve] timer.
Why is water not supplied to my Panasonic NA-F90H2 Washer?
If your Panasonic Washer isn't supplying water, first, check that the water faucet is turned on and that the water supply isn't cut off. Then, inspect the water supply hose connection for any dirt clogs.
Why Panasonic NA-F90H2 buttons do not work?
If the buttons on your Panasonic Washer aren't working, note that only the [Water Level] button is available after the wash cycle begins. To change any other settings, press the [Power Off] button first, then reconfigure the desired settings.
How to stop Panasonic NA-F90H2 from draining water when filling it?
If the water is drained even when filled by a bucket in your Panasonic Washer, avoid leaving the machine powered on for more than 15 seconds without starting a cycle. Fill the water while the machine is powered off or after you've pressed the start button.
Why Panasonic NA-F90H2 changes to rinsing during spinning?
If your Panasonic Washer starts rinsing midway during spinning, it's because the laundry is unbalanced. The machine will automatically begin rinsing and correcting the unbalance. The spinning will return to normal afterward.
Why Panasonic NA-F90H2 Washer tub is not filled with water when starting rinse cycle?
If you start with the rinse cycle and the tub of your Panasonic Washer isn't filling with water, it's because if there's existing water in the tub, the operation begins with draining. After the spin cycle finishes, the tub will then fill with water.
Why Panasonic Washer begins filling water mid-cycle?
If your Panasonic Washer begins filling with water in the middle of a wash, it may be due to a large laundry amount at the HIGH water level, causing the machine to fill automatically. It also fills automatically when the water level goes down.
Why does my Panasonic NA-F90H2 Washer laundry rotate irregularly during draining?
If, during draining, the laundry and spinner rotate with irregular movements in your Panasonic Washer, it's to suppress detergent suds build-up. The washing tub turns slowly and quickly to achieve this.
What to do if Panasonic NA-F90H2 buzzer sounds and drains when opening the lid?
If you open the lid of your Panasonic Washer during washing or rinsing after setting the [Child Lock] mode, the machine will force the draining process. To resolve this, pull out the power plug from the outlet and plug it back in after 5 seconds.
How to prevent softener from spilling in Panasonic NA-F90H2?
If your Panasonic Washer's softener spills out from the drawer, ensure you keep the softener level below the indicated mark to prevent immediate overflow. Also, avoid closing the softener drawer forcefully, as this can cause spillage.
General| Model | NA-F90H2 |
|---|---|
| Type | Top Load |
| Capacity | 9 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Water Level | 5 Levels |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
Steps to ensure the washing machine is properly installed and ready for use.
Explanation of the detergent indicator and how it works for precise measurement.
Method for properly dissolving stubborn powdered detergents.
Details on panel indicators for water level, time, and power status.
How to select wash, rinse, spin, and program courses.
Information on using Reserve, Air Dry, and Ag Crystal Shower courses.
Step-by-step guide to using the Ag Crystal Shower course.
Information on agent lifespan and the protective benefits of Ag ion coating.
Guidelines for folding blankets and preparing them for washing.
How the air dry cycle works and its limitations.
Steps to activate the child lock program and its indication.
Steps to perform the tub hygiene cycle using bleach.
Instructions for cleaning water supply hose filter, Ag Air-Filter, and lint filters.
Guidance on cleaning the main unit and the upper part of the tub.
Immediate actions for spinner tub issues and prohibitions like liquids, magnets, overloading.
Advice on detergent levels, condensation management, and vinyl cover avoidance.
Understanding unbalanced laundry effects and power cord safety.
Guidelines for machine placement, power cord connection, and grounding.
Steps to adjust the legs for level and stable installation.
How to install the water tap adaptor and connect the supply hose to the valve.
Recommendations for extending the drain hose length and height.
Resolving issues with water filling, high or low water levels.
Addressing spin cycle changes, uneven rotation, and button failures.
Troubleshooting draining problems, softener spills, and water supply failures.
Troubleshooting errors related to water hose, lid, position, and Child Lock.
Understanding the H01 error and when to contact a dealer.
