Panasonic NA-W1350T - User Manual

This document is an operating manual for a Panasonic Twin-Tub Electric Washing Machine, specifically models NA-W1350T and NA-W1250N. It provides detailed instructions on installation, operation, and maintenance.

Function Description

The Panasonic Twin-Tub Electric Washing Machine is designed for household laundry. It features two tubs: a wash tub and a spinner tub, allowing for separate washing and spin-drying cycles. The machine offers various wash modes and timers to accommodate different types of laundry and soil levels. A key feature is the "Soak Function," which enhances washing efficiency by allowing detergent to penetrate fabrics more easily and helping to remove stains and odors. This function operates in alternating soak and wash cycles for a set period before transitioning to a regular wash.

Important Technical Specifications

The manual specifies the capacity of the washing machine as 9.0 kg for the NA-W1350T model and 12 kg for the NA-W1250N model (though the tables for NA-W1250N show a maximum of 88 liters and 12 kg, while the NA-W1350T tables show 90 liters and 13 kg, with the overall capacity stated as 9.0 kg). Water levels are categorized as Minimum (61 liters / 4 kg), Low (74 liters / 7 kg), Medium (82 liters / 10 kg), and High (90 liters / 13 kg for NA-W1350T, 88 liters / 12 kg for NA-W1250N). The wash timer can be set for up to 15 minutes for washing/rinsing, while the soak/wash mode timing ranges from 15 to 45 minutes. Spin-drying times typically range from 1 to 5 minutes, depending on the laundry type. The machine is designed to be installed on a sturdy, level floor with a maximum permissible inclination of 2 degrees.

Usage Features

The washing machine is operated via a control panel with several selectors and timers:

Wash Timer: Sets washing/rinsing time up to 15 minutes.
Soak Function: Engages a soak/wash mode for 15-45 minutes, with alternating soak and wash cycles. To set a short timer (2 minutes or less), the user must turn the control beyond the 5-minute mark and then back to the desired position.
Water Supply Selector: Directs water to either the wash tub (left) or the spin tub (right). An indicator warns if too much water has been supplied.
Wash Selector: Offers "REGULAR" and "GENTLE" wash styles, chosen based on the type of clothes and soil level.
Cycle Selector: Allows selection between "WASH" (for washing), "RINSE" (for overflow rinsing), and "DRAIN" (to drain water from the wash tub).
Spin Timer: Sets the spin-dry time, typically 1-5 minutes. Similar to the wash timer, for short durations (2 minutes or less), the selector should be turned beyond the 4-minute position before returning to the desired setting.

The manual provides detailed tables for recommended laundry amounts, water levels, wash times, and detergent quantities for various fabric types (pajamas, T-shirts, bath towels, children's wear, aprons, sheets, socks, underwear, handkerchiefs) and soil levels (heavy stained, synthetic fiber, cotton).

Maintenance Features

Maintenance instructions focus on cleaning the lint filter and addressing issues with the pulsator.

Lint Filter Cleaning: The lint filter should be pulled out from its lock by pressing and pulling the upper part of its side. After rinsing the dirt from the filter with water, it should be reinserted by first placing the bottom part and then pressing down to lock it.
Pulsator Maintenance: If laundry or a button gets stuck in the pulsator, the pulsator can be unscrewed by turning it left with a screwdriver and then pulled out. After removing the obstruction, it should be placed back.

Safety Precautions

The manual emphasizes several safety precautions:

Power Cord: Do not use if torn or damaged. Always pull the insulated body of the plug, not the cord. Avoid placing heavy objects on the cord.
Turning Parts: Do not dip hands into the spinning tub while it is working.
Unsuitable Clothes: Do not wash inflammable stained clothes (e.g., benzene, thinner).
Water Temperature: Do not use water 50°C or higher, as it may deform plastic parts.
Installation Location: Do not install in bathrooms or places with high moisture to prevent insulation deterioration, electric shock, overheating, or rust. Ensure installation on a sturdy floor (max 2-degree inclination).
Children Safety: Do not allow children to use the machine alone, play with the appliance, or play with the wash tub or spinner. Supervise children to ensure they do not fall into the tub or drown.
Pre-Wash Detergent: Use pre-wash detergent inside the machine, not outside, to prevent damage to plastic parts.
Control Panel: Avoid water spills on the control panel, do not place wet clothes on it, and do not use chemicals to clean it.
Drain Hose: Ensure the drain hose is properly connected and placed in a sink at a height of no more than 1.2 meters.
Spinning Safety: If the spinner tub does not stop within 15 seconds of lifting the cover, immediately stop the machine and call for service. The machine will stop within 5-10 seconds if the lid is opened during spinning. It will not work if the spinner lid is not closed.
Detergent Use: Do not use too much detergent, as it can lead to insufficient rinsing.
Cover Material: Do not use vinyl chloride covers, as they can damage plastic parts and paint. If using a cover, place a cloth underneath to prevent direct contact.
Waterproof Items: Do not wash or spin waterproof items (e.g., raincoats, ski wear), as they may fly out of the spinner tub and damage the clothes or machine.
Water Pressure: If water pressure is too high, tighten the tap to prevent the inlet hose from coming off or water leaking.
Freezing Prevention/Repair: In winter, do not leave water in the wash tub to prevent freezing. If freezing occurs, pour warm water (below 50°C) into the wash tub, covering the pulsator, and let it soak for 10 minutes until the pulsator can be turned by hand and water drains smoothly.
Automatic Drain Pump: The drain pump operates automatically under certain conditions; ensure the cycle selector is set to "WASH," the spin-dry timer to "OFF," and the spinner tub lid is closed when the pump is not needed.
Insufficient Spinning: To avoid insufficient spinning due to laundry amount, do not drain water from the wash tub during spinning.