What to do if my Panasonic Washer machine cannot be operated?
If your Panasonic washer isn't operating, try these steps: First, switch off the circuit breaker, hold the plug tightly, or replace the outlet. If that doesn't work, replace the fuse or reset the circuit breaker. As a last resort, replace the wire.
Why is my Panasonic Washer spin extractor not turning?
If the spin extractor on your Panasonic washer isn't turning, try these solutions: Ensure the spin extractor’s lid is closed. Adjust the space between the brake wheel and brake pad at the brake shoe. Attach or replace the brake shoe. Adjust the position. Replace the capacitor motor or the motor itself. Tighten any loose screws. Replace the spin timer. Weld any broken spots. Finally, remove any foreign matter that may be obstructing it.
Why is my Panasonic Washer wash motor not working?
If the wash motor on your Panasonic washer isn't working, try replacing the wash timer, replacing the motor, or replacing the capacitor. You might also try welding the wire again, or attaching the wire firmly or replacing it.
What to do if my Panasonic NA-W1400T Washer machine leaks water?
If your Panasonic washer is leaking water, consider these solutions: Replace the outer tube buffer A, replace the hose, replace the overflow tube, or replace the tub A.
What to do if my Panasonic NA-W1400T spin extractor shakes?
If the spin extractor on your Panasonic washer is shaking, try these solutions: Install the machine on a secured surface, replace the outer tube buffer A, adjust the suspension to get balance, or remove any fallen matters.
Why Panasonic NA-W1400T machine cannot clean clothes efficiently?
If your Panasonic washer isn't cleaning clothes efficiently, make sure users are instructed on the correct method. You can also fix or replace the belt or adjust the space for motor assembling.
What if my Panasonic NA-W1400T wash motor can spin only one way?
If the wash motor on your Panasonic washer only spins one way, try replacing the wash timer.
What to do if my Panasonic Washer drain valve cannot be closed?
If the drain valve on your Panasonic washer won't close, try these steps: Remove the valve lid assembly and clear any foreign matter. If that doesn't work, replace the entire valve packing set. Also, ensure all screws are tightened.
What to do if my Panasonic NA-W1400T motor makes noise and cannot be operated and started?
If the motor in your Panasonic washer is making noise and won't start, try repairing the stuck part or removing any obstructions. Also, consider replacing the capacitor.
Why Panasonic NA-W1400T clothes are torn?
If your Panasonic washer is tearing clothes, adjust the spinner to be at the same level as the drum. Also, blunt the edge or replace the screw. Adding more water so that clothes can float and spin easily may also help.
Exploded view diagram for component set A, showing assembly order and part locations.
List of replacement parts for component set A, including part numbers and model applicability.
Exploded view diagram for component set B, showing assembly order and part locations.
List of replacement parts for component set B, including part numbers and model applicability.
Exploded view diagram for component set C, showing assembly order and part locations.
List of replacement parts for component set C, including part numbers and model applicability.
Exploded view diagram illustrating the packing components and their arrangement.
List of replacement parts for packing, including part numbers and model applicability.
General| Washing Capacity | 14 kg |
|---|---|
| Capacity | 14 kg |
| Spin Speed | 700 rpm |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Type | Top Load |
| Water Level Selection | Yes |
To Next Page