Panasonic NA-W90B1 User Manual (English)

Other manuals for Panasonic NA-W90B1

Questions and Answers:

J
jamiegonzalesAug 18, 2025
What to do if the spin extractor does not turn on my Panasonic NA-W90B1 Washer?
- J
  Johnathan JuarezAug 18, 2025
  If your Panasonic Washer's spin extractor isn't turning, here are a few things you can try: * Ensure the spin extractor’s lid is closed. * Adjust the space between the brake wheel and brake pad, which can be done at the brake shoe. * Attach or replace the brake shoe. * Adjust the position. * Replace the capacitor motor or the motor itself. * Tighten any loose screws. * Replace the spin timer. * Reweld any broken spots. * Remove any foreign objects that may be obstructing it.
J
Johnny WestAug 20, 2025
What to do if the wash motor can not be operated in my Panasonic NA-W90B1?
- M
  Michael AguilarAug 20, 2025
  If your Panasonic Washer's wash motor isn't working, consider these solutions: * Replace the wash timer. * Replace the motor. * Replace the capacitor. * Reweld the wire if necessary. * Attach the wire firmly or replace it.
K
Kevin WilliamsAug 23, 2025
Why is my Panasonic NA-W90B1 Washer's motor making noise and can not be operated?
- J
  James KellyAug 23, 2025
  If your Panasonic Washer's motor is making noise and won't start, try these steps: * Repair the stuck part or remove any obstructions. * Replace the capacitor.
T
Tracy FitzgeraldAug 26, 2025
How to fix a Panasonic Washer that can not be operated?
- Q
  qwardAug 26, 2025
  If your Panasonic Washer machine cannot be operated, try the following: * Switch off the circuit breaker, hold the plug tightly, or replace the outlet. * Replace the fuse or reset the circuit breaker. * Replace the wire.
N
ntaylorAug 28, 2025
Why does the spin extractor shake on my Panasonic NA-W90B1 and how to fix it?
- N
  nicholas59Aug 28, 2025
  If the spin extractor shakes in your Panasonic Washer, try these solutions: * Install the machine on a secured surface. * Replace the outer tube buffer A. * Adjust the suspension to achieve balance. * Remove any fallen objects.
C
charlestylerAug 30, 2025
How to fix a Panasonic NA-W90B1 drain valve that can not be closed?
- T
  Tanya CraigAug 30, 2025
  If the drain valve on your Panasonic Washer won't close, here are some steps to take: * Remove the valve lid assembly and clear away any foreign objects. * Replace the entire valve packing set. * Replace the valve lever.
J
Jennifer SanchezSep 1, 2025
How to improve cleaning efficiency of my Panasonic NA-W90B1?
- H
  Heather PetersenSep 1, 2025
  If your Panasonic Washer isn't cleaning clothes well, consider the following: * Make sure users are instructed on the correct washing method. * Fix or replace the belt, or adjust the space for motor assembly.
W
Whitney PerrySep 4, 2025
Why does the wash motor spin only one way on my Panasonic NA-W90B1?
- M
  Michael HillSep 5, 2025
  If the wash motor in your Panasonic Washer only spins one way, you should replace the wash timer.
M
Martin CombsSep 6, 2025
What to do if clothes are torn after washing in my Panasonic NA-W90B1?
- A
  Alison GutierrezSep 7, 2025
  To address torn clothes in your Panasonic Washer: * Adjust the washing propellant to match Tub A. * Blunt any sharp edges inside the washer. * Add more water so the clothes can float and spin easily.
C
Christine LopezSep 9, 2025
Why does the wash motor take a very long time for each way on my Panasonic Washer?
- C
  Christopher WilliamsSep 9, 2025
  If the wash motor on your Panasonic Washer spins both ways but takes a very long time, replace the wash timer.