3.
2.
1.
16
CARE AND MAINTENANCE
Be sure to remove the power plug from the power outlet before cleaning the machine and lter.
How to clean the Lint Filter
Pull out the lint lter from the lock. By using ngers to
press and pull out at the upper part of the lint lter’s side.
Rinse the dirt from the lter with water.
The laundry or button is stuck into the pulsator.
If the buttons, coins or the like wedged in the gap pulsator and cannot be taken,
contact your nearest service center.
Set it back to the original position.
- insert the bottom rst as shown in the gure
- press down and lock as the arrow.
-
OI NA-W100G1 En-AR-PE.indd 16 3/5/2558 BE 3:18 PM
To Next Page
Loading...
