6
1, 7
2
4
5
3
8
HOW TO WASH
1. Set the WASH MODE / DRAIN to “GENTLE” or “REGULAR”.
2. Set the WATER SUPPLY SELECTOR to “WASH TUB”.
3. Fill the wash tub with water up to desired amount (see attached table 1).
4. Put detergent according to the amount of water used (see the rules on the packaging). Set Wash Timer to 1-2 minutes.
5.
Put the clothes into the wash tub then set Wash Timer according to the load of clothes to be washed (see attached table 2).
6. When washing is completed, drain off the water by adjusting the WASH MODE / DRAIN to “DRAIN” position.
7. After the washing water is discharged, turn the WASH MODE / DRAIN to “GENTLE” or “REGULAR” position.
8. Fill the water overwhelms the cloths.
9. While the water flows into wash tub, set Wash Timer to 5 min. or 7 min. position to rinse.
10. When rinsing is completed, drain off the water by turning WASH MODE / DRAIN to “DRAIN” position.
(“REGULARGENTLE 1
(“WASH TUB 2
3
4
( 5
6
DRAIN
7
REGULARGENTLE
8
9
10
DRAIN
1
2
3
- 4
5
6
DRAIN
7
REGULARGENTLE
8
9
10
DRAIN
OI NA-W100G1 En-AR-PE.indd 8 3/5/2558 BE 3:18 PM
To Next Page
Loading...
