Panasonic NB-G110PLVA - P.C. Board Operation Test

10
5.2. Operation check test for the P.C. board (Do not turn on the power of the
heater during the check test.)
1.
• Set the power button to “ON”.
2.
• Connect the power cord to the 120V.a.c. with the temperature key “ (up)” and the timer key “ (down)” pressed.
3.
• Display oder of “VinAD” in the Lcd display.
No. Operation Working description Items to be checked
Display and buzzer information Action
1 • Set the power button to ON.
• Connect the power cord to the
120 V a.c outlet with the
temperature keys
" " and timer keys " "
pressed.
• The power lamp comes on.
• Display "Vin a.c oder" in LCD Dis-
play.
No power is supplied to the
heater.
Check if the mode changes to the
test one.
* The mode change was ended in
failure.
(Perform the operation of No.1
again.)
2 • Press the "Toast" key. • The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Toast" lamp comes on.
3 • Press the "Waffle / Frozen" key. • The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Waffle / Frozen" lamp comes
on.
4 • Press the "Roll / Reheat" key. • The power lamp comes on.
• The buzzer sounds once when the
key is operated.
• The "Roll / Reheat" lamp comes
on.