EN20 EN21
Specications
Power supply See the label on the back of appliance
Power Consumption 1800 W
Capacity 38 L
Temperature setting of
cavity center
Set temperature range 70 ~ 230 °C
(±30 °C from average temperature)
Automatic thermolator
Upper and lower tubes:
Adjustable thermostat
Rated power (approx.)
Upper and lower tubes
1800 W
Fermentation Fixed
thermostat
Upper tube 900 W
Timer
120 minutes / program
control
Lower tube 900 W
Net weight (approx.) 9.2 k
g
Length of power cord
(approx.)
0.9 m
Size (approx.)
External dimension
(W × D × H)
53.5 × 42.4 × 37.0 cm
Inner side
(W × D × H)
39.0 × 34.0 × 29.8 cm
Enamel baking tray
(internal dimension)
(W × D × H)
39.0 × 34.0 × 29.8 cm
Troubleshooting
Replacement Parts
■
Replacement parts are available at the place of purchase or a Panasonic service center.
Problem Cause Action
Bake failure
● The plug is not inserted
properly.
● A fault exists.
● Insert the power plug rmly
into the outlet.
● Consult the place of
purchase or a Panasonic
service center.
Odor
● The baking time is too long.
● The enamel baking tray
releases an odor or there is
some food on the cooking
rack.
● Conrm if there are any
drippings of grease or
crumbs in the crumb tray.
● Turn off the machine, and
clean up the food with odor.
● Clean the enamel baking
tray and the cooking rack.
● Clean the crumb tray.
Part name Part number
Enamel baking tray BK00P184
Cooking rack BD30P1841
Crumb tray BC40P184
Extract bracket BA65P184-K0
Holding rack BK55P184
Turnspit
Baking stick BK60P184
Baking fork BK61P184
Please check the following points
before arranging for service.