Panasonic NE-1252 - Care of Your Oven; Cleaning the Splatter Shield; Cleaning the Air Filter

21
9.9. Replacement of PCB FU (SD
card)
1. Disconnect CN22 connector from PCB F(U).
2. Remove 3 screws holding SD card unit.
3. Remove 2 screws holding PCB bracket.
4. Remove 2 screws holding PCB F(U).
9.10. Replacement of PCB HU (LED
light)
1. Disconnect CN17 connector from PCB H(U).
2. Remove 1 screw holding PCB bracket.
3. Remove 2 screws holding PCB H(U).