6
5 Installation Instructions
5.1. Wiring requirements and power source voltage selection
Wiring Requirements
No other appliance should share the circuit with the micro-
wave oven. If it does, the branch circuit fuse may overload
and either cause the oven to heat slower than expected or
blow the fuse.
1. For Mode NE-12521/NE-12523/NE-1252
The oven must be on a SEPARATE, 20 Amp, 60 Hz-120V
GROUNDED CIRCUIT.
2. For Model NE-1752/NE-1772/NE-17521/NE-17523/NE-
17723
This oven must be on a separate, 60 Hz GROUNDED
CIRCUIT-minimum 15 amps.
3. For Model NE-21521/NE-21523/NE-2152
This oven must be on a separate, 60 Hz GROUNDED
CIRCUIT-minimum 20 amps.
Power Source Voltage Adjustment
For 208V/230V models
The microwave oven automatically detects 208 V and 230
V-240 V. Insert the plug, and if the Digital Display Window
goes blank 10 seconds after use, unplug and insert the plug
again.
To Next Page
Loading...
