8
3. Memory setting for single stage
TO PROGRAM MEMORY AREA B: Follow steps 1 above.
Touch the Memory Shift pad twice and a small [B] will
appear beneath the flashing [PROG].
Touch the memory pad you wish to program, and the previ-
ously selected time and power level will appear in the dis-
play window.
NOTE: Once the Memory area B has been selected it
cannot be changed back to Memory area A. If you do
not require Memory area B, cancel it by touching the
cancel pad and begin again.
4. Memory setting for 2nd or 3rd stage
NOTE: For a 3rd stage heating cycle, select a further
power level and dial in a time, between steps 3 and 4
above.
To Next Page
Loading...
