Need help?Do you have a question about the Panasonic NEXTIVA KT-TGP 600 and is the answer not in the manual?
General| Type | DECT Cordless Phone |
|---|---|
| Number of Lines | 8 |
| Number of Handsets | Up to 8 |
| Range | Up to 300 meters outdoors, 50 meters indoors |
| Connectivity | DECT |
| Protocols | SIP |
| Speakerphone | Yes |
| Power | AC adapter |
| Base station connections | Ethernet |
| Ethernet Ports | 1 |
| Headset Port | Yes |
| Display | LCD |
| Battery Life | Up to 10 hours talk time |
| Headset Jack | 2.5mm |
| Voice Codecs | G.711 |
Instructions for connecting the AC adapter and Ethernet cable to the base unit and charger.
Instructions for mounting the base unit on the wall using screws.
Identifies the status indicator and handset locator button on the base unit.
Steps for administrators to assign a device to a user via the NextOS 3.0 Beta portal.
Notes that time cannot be changed locally and requires Nextiva Support.
Steps to configure multi-number settings for incoming calls on handsets.
Steps to configure multi-number settings for outgoing calls by handset.
Step-by-step guide to making an outbound call using the handset.
Instructions to register a new handset to the base unit.
Steps to place a second call while on an existing call.
How to answer an incoming call.
How to accept a second incoming call while on another call.
Steps to end an active call.
Guide to performing warm transfers.
Instructions on how to set up a conference call.
Steps to enable the Do Not Disturb feature via the phone menu.
Instructions to enable Do Not Disturb using a star code.
Identifies the controls on the KX-A406 repeater accessory.
Explains the purpose and initial setup of the repeater.
Steps to enable repeater mode using the handset menu.
Steps to enable repeater mode via the web interface.
Instructions to register the KX-A406 repeater to the base unit.
Steps to transfer a call from one handset to another.
To Next Page