HOW TO REMOVE THE COVER CASE
1
.
Place the unit on
a
firm and stable surface.
2.
While
pressing the Case Lock Button, lift the Cover Case to open.
HOW TO FILL WITH WATER
Make sure the
iron is
turned off and the AC Power Cord is unplugged from the electrical outlet.
The iron can
be
filled with the Water Tank in place or removed. Confirm that the Steam/Dry
Selector is moved
to
the Dry ironing position when installing or removing the Tank.
1
. Remove the Water Tank by pressing the Release Button.
2. Open the Water Fill Cover.
3. Fill the Water Tank
up to
the
"
MAX
"
line.
DO NOT OVERFILL. Check the water level with the Water Tank held in its vertical position.
4. Close
the Water Fill
Cover.
5.
Re-install the Water Tank
into the
main
unit. Push it until a
click
sound is heard.
To Next Page
Loading...
