21
1
4
6
9
11
13
3
5
7
10
12
14
8
2
1 Display window
2 Microwave power levels button
3 Chaos defrost programs button
4 Grill button
5 Auto sensor programs button
6 Oven power button
7 Auto weight programs button
8 Time / Weight selection dial
9 More button
10 Less button
11 Memory button
12 Timer button
13 Stop /Cancel button:
Before Cooking:
One press clears your instructions
During Cooking:
One press temporarily stops the cooking
program. Another press cancels all your
instructions and the time of day will appear
in the display.
14 Start button
Touch to start operating the oven. If during
cooking the door is opened or Stop/Cancel
is touched once, Start has to be touched
again to continue cooking.
Beep sound
When a button is pressed correctly
a beep will be heard. If a button
is pressed and no beep is heard,
the unit has not or cannot accept
the instruction. At the end of any
complete program, the oven will
beep 5 times.
Note
When in stand-by mode the
brightness of the display will be
reduced.
The oven will enter stand-by
mode, when fi rst plugged in
and immediately after the last
operation has completed.
If an operation is set and start
button is not pressed, after 6
minutes the oven will automatically
cancel the operation. The display
will revert back to clock mode.
Control panel
* The control panels of NN-DF386B/
NN-DF386M have same key layout.
F0003BM53BP.indd sec21F0003BM53BP.indd sec21 2017/2/17 15:02:432017/2/17 15:02:43
To Next Page
Loading...
