36
Let’s Start to Use Your Oven
1
Plug in.
Plug into a 13 amp fused electrical socket.
2
Select 200 °C Oven to burn off the oil.
(
will appear in the display window with
the oven temperature) (this procedure is to
burn off the oil used for rust protection in
the oven.) Remove all accessories from the
oven. (See page 46 for details)
3
Enter Time.
Tap
until 10 minutes is displayed in the
window.
4
Tap the Start/Set pad to start.
The time in the display will count down. The
oven will beep at the end of the program. The
oven is now ready to use.
Grill elements and oven will be hot.
Caution!
This is to enable you to experiment setting various programs. (“d”
will appear in the display window. This is to confirm that there is no
microwave power produced and it is safe to use the oven without any
food). To set Demonstration Mode: Tap Micro Power pad once, then tap
Stop/Cancel pad 4 times. To cancel demonstration mode: Tap Micro
Power pad once, tap Stop/Cancel pad 4 times.
Note
To Next Page
Loading...
