English
- Eng-6 -
Feature Diagram (Front view)
Nameplate
Control Panel
Power Plug
Door Window
Evaporating Flume
Glass ceramic plate
1. Clean the glass ceramic plate after cooling.
2. Do not directly place the food on the glass ceramic plate. Place it on a container
or container rack special for the microwave oven.
Power Cord
Opening Handle
Door Hinges
When opening or
closing the door, do
not stretch your fingers
inside the oven.
Metal Tray
1. Place the metal tray on the
shelves.
2. Take it out with thermal
insulation gloves after use.
To avoid scalding, do not
touch it with your hands.
Ceramic Cover
1. Install over the evaporating
flume.
2. After using steam function,
do not touch the ceramic
cover to avoid scalding.
3. Clean after cooling down.
Double Grill Tray
1. Do not place it on the door window.
Otherwise, the oven window may be
damaged.
2. Place it on the shelves when using.
3. When cooking food, place it in the middle of
wavy range of the double grill tray, avoiding
letting the food into the groove around, so
that food can't be completely baked.
Water Tank
Water Tank
1. The water tank must be installed in
the middle of the decorative plate.
2. Do not fill water above the full scale
on the water tank.
3. To avoid build-up, please use distilled
water. Do not use mineral water.
4. To avoid leakage, verify if the water
tank is correctly installed in place.
5. Please clean the water tank and the
rubber cover regularly.
6. Do not remove the rubber cover on
the water tank. Otherwise, the water
tank may leak water.
Decorating Plate (Collector Pan)
1. Install the Decorating Plate at the
rubber feet before using.
2. Clean and wipe to dry after using.
3. After cleaning, re-install the plate back
to the rubber feet.
Door Safety Lock
System
Notes:
1. Never use micro power without a load in the cavity.
2. When using the steam function, always clean and wipe the cavity, flume and decorative plate after cooling the oven.
3. It’s normal if white smoke gives off when first time using the grill, oven, combination function.
4. After using the microwave oven, the fan motor will continue operating several minutes. It’s normal.
5. Menu label should be applied closely alone the oven top.
Lower Shelves
Higher Shelves
Wire Rack
Glass Tray
1. Place in the arrow direction.
2. Do not drag the glass tray on
the door window.
3. Never put it on the shelves.
Menu Label
Position your supplied
auto program menu
label here.
Warning Label Warning Label
To Next Page
Loading...
