Panasonic NN-DS596MEPG User Manual

44 EN
To set a standing time
By using the Timer, you can program Stand Time after cooking is completed or use to
program the oven as a minute timer.
Example:
1000 W (Max): 4 mins Stand Time: 5 mins 1000 W (Max): 2 mins
Using the timer
Tap Micro Power
once.
Touch Timer/Clock
once.
Tap Micro Power
once.
Set the standing time to
5 minutes using the
Time/Weight dial.
Set the cooking time to
2 minutes using the
Time/Weight dial.
Touch Start.
Set the cooking time to
4 minutes using the
Time/Weight dial.
Select Cooking
Method
& Time
Set the cooking program,
by entering cooking
method and time required.
Touch Timer/Clock
once.
Touch Start.Set the standing time using
the Time/Weight dial (up to
9 hours).
Note
1. Three-stage cooking can be programmed including stand time.
2. If the oven door is opened during the stand time or minute timer, the time in the
display window will continue to count down.
3. If the programmed stand time exceeds one hour, the time will count down
in units of minutes. If less than one hour, the time will count down in units of
seconds.
4. This feature may also be used as a minute timer. In this case touch the Timer/
Clock, set time and touch Start.
5. Standing time cannot be used after an auto program.

Panasonic NN-DS596MEPG Specifications

General

Brand	Panasonic
Model	NN-DS596MEPG
Category	Oven
Language	English