To Next PageTo Next Page
Need help?Do you have a question about the Panasonic NN-GD376S and is the answer not in the manual?
General| Capacity | 23 L |
|---|---|
| Microwave Power | 800 W |
| Grill Power | 1000 W |
| Inverter Technology | No |
| Control Type | Touch Control |
| Cooking Modes | Microwave, Grill, Combination |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Turntable Diameter | 285 mm |
| Safety Features | Child Lock |
| Type | Combination Microwave Oven |
Describes how the High Voltage Inverter Power Supply controls output power via signals from the Digital Programmer Circuit.
Explains the function of the Inverter Power Supply in converting line voltage to high DC voltage for the magnetron.
Details the operation of auto control features, including power levels and cooking times for different modes.
Details critical safety warnings regarding high voltage and high temperature associated with the Inverter Power Supply.
Covers warnings for part replacement, fuse issues, foreign object insertion, and post-repair checks.
Advises caution when handling the unit due to potentially sharp edges.
Provides step-by-step instructions for removing and replacing the magnetron.
Details the procedure for removing and replacing the Digital Programmer Circuit and membrane keyboard.
Guides on replacing the low voltage transformer and/or power relays, including safety precautions.
Instructions for removing and replacing the fan motor assembly.
Step-by-step guide for disassembling and replacing the oven door components.
Procedure for removing and replacing the turntable motor.
Instructions on how to remove and replace the quartz heater.
Details the procedure for removing the High Voltage Inverter unit.
Describes how to test the continuity of primary latch, door, and power relay B switches.
Outlines the procedure for testing the continuity of the short switch.
Covers continuity checks for magnetron and membrane keyboard components.
Provides instructions and tests for determining if the High Voltage Inverter Power Supply unit is functioning correctly.
Explains how to test the temperature thermistor and the expected resistance values.
Details the adjustment procedure for primary latch, secondary latch, and short switches.
Describes a simple method to measure microwave output power by temperature rise.
Addresses symptoms like oven stopping during cooking or initial power-up failures.
Focuses on diagnosing issues with the Digital Programmer Circuit, Inverter, and Magnetron.
Guides on testing semiconductors using an ohmmeter for fault finding.
Illustrates the oven assembly and lists general component parts with numbers and quantities.
Details parts for door assembly, wiring, escutcheon base, packing, and inverter components.
Presents the detailed schematic diagram for the Digital Programmer Circuit of the NN-GD376S model.
Presents the detailed schematic diagram for the Digital Programmer Circuit of NN-GD366M and GD356W models.
Lists the specific parts for the Digital Programmer Circuit, including component details.
