Panasonic NN-S676 - Setting Power and Time

Power & Time Setting
I Select Power Level
[Press| Powernvet[__% Powe
twice DEFROST
Sensor Coating
3 times MEDIUM-HIGH
4 times MEDIUM
5 times MEDIUM-LOW
Menu Action Screen
6 times LOW
When selecting HIGH Power, you can start from step 2.
Reheating is best done on medium.
2 Set Cooking Time
(Up to 99 minutes and 99 seconds)
€.g. 12 minutes
Bete Ok
3 Press Start
» Cooking will start.
The time in the display window will begin to count down.
To recall the selected power level during cooking, press Power
Level Pad.
For 2 or 3 stage cooking, repeat above steps 1 and 2 before
pressing Start Pad.
Quick Min Function
This function 1) helps you in programming cooking time easily and 2) allows you to add extra cooking time.
1) To Set Cooking Time:
(Power tever) —e- [iit] —e (Sart
Press to set cooking time (up to 10 taps/minutes) after selecting the desired power level, and then press Start.
If you set cooking time without selecting power level, oven automatically selects High Power.
NOTE: After setting the time by Quick Min Pad, you cannot use Number Pads, and vice versa.
2) To Add Extra Cooking Time:
Press to add extra cooking time (up to 10 taps) during cooking.
» Cooking time changes to include extra time and continues to count down in the display window,
Py