Panasonic NV-DS29B - Interface Board Signals

12:30:45
15.10.2002
LOD BRIGHTNESS
Sener
Leb R
C
{
Using the Viewfinder/LCD Monitor
WUsing the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1: Tilt the Viewfinder upward.
2 Adjust by sliding the Eyepiece Corrector Knob @.
WUsing the LCD Monitor
With the LCD Monitor open, you can also record the picture while
watching it.
1 Press the [PUSH OPEN] Button and, at the same
time, bring the LCD Monitor out about 90° in the
direction of the arrow.
The Viewfinder goes off.
2 Adjust the LCD Monitor angle according to the
desired recording angle.
The LCD Monitor can rotate a maximum of 180° @ from the
vertical position to the upward direction and a maximum of 90°
C3] to the downward direction. Forcefully rotating the LCD
Monitor beyond these ranges will damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
WAdjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or [VCR
FUNCTIONS] Main-Menu is selected, the following items are
displayed. (> 16)
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS}
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and then
turn the [PUSH] Dial to raise or lower the number of vertical bars in
the Bar Indication.
A larger number of vertical bars indicates stronger brightness or
colour saturation.
For other notes concerning this item, see page 48.
IS