Panasonic NV-DS29B - Bottom View

24
PROS FADE
ganic,
Image Stabilizer Function
If the Movie. Camera might be shaken while recording, the camera
shake in the image can be corrected.
If the Movie Camera shakes too much, this function may not be
able to stabilize images.
1 Press the [SIS] Button.
©The [@)] Indication @ appears.
To Cancel Image Stabilizer
Press the [SIS] Button.
For other notes concerning this item, see page 42.
SD DD RD DE Rd RD PR RS Pd Fd Pd Pd ad fd
Fade In/Out Functions
Fade In@
Fade In brings out images and sounds gradually from a black screen
at the beginning of a scene.
1 Keep pressing the [FADE] Button during the
Recording Pause Mode.
©The image fades out gradually.
2 When the image is completely gone, press the
Recording Start/Stop Button to start recording.
3. Release the [FADE] Button about 3 seconds after
starting recording.
©The image reappears gradually.
Fade Out @
Fade Out causes images and sounds to disappear gradually,
leaving a black screen at the end of a scene.
1 Keep pressing the [FADE] Button while recording.
The image fades out gradually,
2 When the image is completely gone, press the
Recording Start/Stop Button to stop recording.
3 Release the [FADE] Button.
©The still picture cannot fade in or fade out.