Panasonic NV-MX500 - VCR Mode External Connections; Recording Contents of Other Equipment; DV Cable Recording (Digital Dubbing)

VCR Mode
-30-
Movie Camera:
6 Press the [∫] Button to stop playback.
Recording the Contents of Other Equipment
After connecting the Movie Camera and the other
equipment as illustrated, start the following procedures.
1 AV Cable
2 S-Video Cable (not supplied)
≥If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
Movie Camera:
1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
2 Insert an unrecorded Cassette.
Other Equipment:
3 Insert a recorded Cassette and start playback.
Movie Camera:
4 While pressing the [REC] Button (63), press the
[PLAY] Button
(83).
5 Press the [;] Button (80) or [∫] Button (81) to stop
recording.
Other Equipment:
6 Press the Stop Button to stop playback.
≥For other notes concerning this item, see
-46-.
21-pin Adaptor
MIC
AV IN/OUT
PHONES/REMOTE
USB/
EDIT
D (MINI)
S-VIDEO
IN/OUT
1
2
[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
(26)
(51)
M
E
N
U
PUSH
SHUTTER/IRIS/
VOL/JOG
INDEX INDEX
SELECT
STOP
KL
∫
V
/REW
STILL ADV
T
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
(63)
(83)
(80)
(81)
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Movie Camera with other digital video
equipment that has a DV Input/Output Terminal using a DV
Cable VW-CD1E (optional) 1, dubbing can be done in the
digital format.
Player/Recorder:
1 Insert the Cassette and set to the VCR Mode.
Player:
2 Press the [1] Button (83) to start playback.
Recorder:
3 While pressing the [REC] Button (63), press the
[PLAY] Button
(83).
≥Recording starts.
To Stop Dubbing
Press the [;] Button (80) or the [∫] Button (81).
≥For other notes concerning this item, see
-46-.
1
DV
INDEX INDEX
SELECT
STOP
KL
∫
V
/REW
STILL ADV
T
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
(63)
(83)
(80)
(81)
B5-B.book 30 ページ ２００２年８月６日 火曜日 午前１１時３３分