To Next PageTo Next Page
Need help?Do you have a question about the Panasonic NV-SJ3MK2AM and is the answer not in the manual?
General| Type | VCR |
|---|---|
| Brand | Panasonic |
| Model | NV-SJ3MK2AM |
| Number of Heads | 2 |
| Playback System | NTSC |
| Tuner | Yes |
| Timer Recording | Yes |
| Remote Control | Yes |
| Weight | 3.5 kg |
| Connections | RF In/Out, AV In/Out |
| Playback Speed | SP, LP, EP |
| Inputs | Composite video |
| Outputs | Composite video |
| Dimensions | 360 x 90 x 232 mm |
Guidelines for operating the VCR safely and preventing damage from humidity, heat, and condensation.
Instructions on how to clean dirty video heads using a cleaning cassette to ensure clear playback.
Illustrates simple connections of the VCR to the TV and aerial using RF OUT and Aerial Connector.
Details connecting the VCR to a TV via the Audio/Video input sockets for improved signal quality.
How to select the display language for the VCR's on-screen menus.
Setting the VCR to display the approximate remaining tape time based on cassette length.
Configure VCR to automatically distinguish or set specific PAL, MESECAM, or B/W colour systems.
Adjust NTSC playback on PAL TV or in 4.43 mode for correct colour and picture.
Steps for starting, stopping, fast-forwarding, rewinding, and pausing playback.
Using FF/REW buttons for quick searching through recorded tape content.
Manual adjustment of tracking and vertical lock to improve picture stability and reduce noise bars.
How to set the VCR to automatically stop playback after a selected duration up to 240 minutes.
Choosing between SP, LP, or EP recording speeds to optimize tape usage and quality.
Steps to start and stop recording from external sources like cameras or other VCRs.
Initiate recording with automatic stop by pressing REC/OTR and selecting duration.
Find the beginning of recorded segments by searching for index signals automatically recorded on tape.
Scan through recorded tape contents at high speed to locate desired programmes.
Index signals are automatically recorded when starting a recording using REC.
View tape time, OTR status, index search, tape speed, and colour system via the OSD button.
Reset the tape counter (elapsed time) to 0:00.00 using the RESET button.
Troubleshoot common problems like no power, unknown language, or poor picture quality.
Diagnose and resolve problems with the remote control not working correctly due to distance or batteries.
