24
Recording with external
recording controls
!
Press MENU. The Menu screen appears.
!
With select menu Others
and confirm with ENTER.
!
With select EXT LINK and turn to
[2] or [1] .
!
Press MENU to return to the Menu screen.
EXT LINK 2: External recording control for
some satellite or digital receivers (video
signal).
EXT LINK 1: For digital receivers transmitting a
special recording control signal, e.g. the F.U.N.
receiver (TU-DSF41).
D
Be sure that the timer programmes stored by your VCR do not overlap with the ones of
the satellite or digital receiver.
Quitting recording stand-by mode
!
Press EXT LINK to quit recording stand-by mode.
The display EL disappears.
You can now play back a cassette or make a manual recording.
You must press EXT LINK again to reactivate the recording stand-by mode.
!
!
Press EXT LINK to activate the VCR´s recording stand-by mode.
Make sure the VCR´s display EL appears.
As long as the satellite or digital receiver transmits the special recording signal,
or a video picture is transmitted, the VCR will continue to record.
Receiver
Aerial
Others 1 / 2
EL
EXT LINK
MANUAL SKIP
EXT LINK
MANUAL SKIP
VCR/DVD
TV
Tape length : AUTO ( E-240)
AV2 : DECODER
TV system : AUTO
SQPB : AUTO
OSD : 4 : 3
Remote : VCR 1
EXT LINK : 2
To Next Page
Loading...
