31
Program Playback
Choose a group and content.
No. Group Content Time
1
---
Play
Clear
Clear all
Video CD CD
WMAMP3
JPEG
DVD-Video
Program Playback
You can programme up to 32 chapters/tracks to be played in any order.
!
Press PLAY MODE while the disc is stopped. The Program Playback screen appears.
D
Use the numeric keys to specify the Group/Title (not with CDs) and the
Content/Chapter. In the case of MP3 or WMA discs or if you select the
numbers using , press ENTER to confirm each entry.
!
Repeat this procedure to make further entries.
!
Press PLAY . The unit starts to play the programme.
!
To change an entry, press to select it, then press ENTER to confirm.
!
Press ENTER to confirm any changes to the Group/Title and Content/Chapter objects.
!
To clear an entry, press to select it first.
!
Press and to select [Clear], then press ENTER.
!
Choose [Clear all] and press ENTER to clear all entries.
To quit the Program Playback mode
!
Stop the disc and press PLAY MODE until Program Playback disappears from the
display. The actual programme is retained.
D
To clear the programme, switch off the appliance or remove the disc.
WMA
JPEG
MP3
CDVideo CD
DVD-Video
Random Playback
All chapters/tracks are played once each in a random order.
!
Press PLAY MODE while the disc is stopped.
The Program Playback screen is displayed.
!
Press PLAY MODE again.
The Random Playback screen is displayed.
!
Press PLAY to start random playback.
!
To deactivate the function, stop the disc and press PLAY MODE.
DVD-V, MP3, WMA, JPEG: Press or the
numeric keys of the remote control unit to
select or specify the track/group to be played
in a random order.
to start to select and press
ENTER PLAY
D
Some discs may not provide this function.
D
An incorrect full title display can result for +R and +RW media.
Playback functions
PROG
PLAY
PLAY MODE
PROG
PLAY
PLAY MODE
PROG
PLAY
PLAY MODE
To Next Page
Loading...
