Panasonic Omnivision PV-9451 - VCR Plus+ Channel Setup Procedure

It is necessary to program the VCR with local channel
information for proper VCR Plus+ System operation.
VCR Plus+ System Channel Setup
° At first, do Channel Setup Preparations below right.
1 Display menu.
Press ACTION.”
Select SET UP
A | eG
U
SET CLOCK 1) Press AV
SET UP CHANNEL to select.
1D 1OMA/ LANGUE: ENGLI SH
SELECT:4 Y KEY 2) Press »
SET :» KEY to display.
END :ACTION KEY
---- SET UP CHANNEL ----] Select VCR Plus+
ANTENNA : CABL
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP to select.
VOR Ble CH SET UP Plus+ CH SET UP
SELECT: a ¥ KEY 2) Press >
SET
:b
KEY
to
display.
END ¡ACTION KEY
Select VCR Plus+
VCR Plus+ CH SET UP
GUIDE CH CABLE CH channels.
1) Press >
í to move
cursor to
SELECT :4 Y KEY R
SET i> KEY right
END :ACTION KEY column.
2) Press AW to change
VCR Plus+ CH SET UP CABLE CH number.
3) Press < to set.
4) Press AY to scroll
GUIDE CH CABLE CH
>» 01 aS
02 == up/down GUIDE CH
SELECT: Y KEY column,
END ACTION KEY « Repeat step 4 until list is
complete.
To make corrections,
Press AV and > to move to error, then AV to change,
or ADD/DLT to erase number.
>
*
Make
each
entry
within
5
minutes
or
the
VCR
will
leave
this
mode.
+
Once
local
channels
have
been
programmed,
they
will
stay
in
memory,
even
in
the
case
of a power
failure.
16
End setup.
Press ACTION
three times.
For assistance, call 1
Process of Recording
Comecton|=>
ESR
Progranmis]
2 SELECT/
~ SET
doREW
> :FF
1 ACTION
5
ADD/DELETE
Model PV-9451
remote is shown here.
Channel Setup Preparations
In order to complete step 4 left, make a
local channel list (see example below).
You will need the following:
* A line up of normal TV and/ or Cable stations
and the channel number you receive them on.
* A list of Guide (VCR Plus+) channel numbers for
the stations you receive found in TV Guide and
selected newspapers.
1 Make a 3-column chart. In the left column, write
the name of all the stations you receive.
2 In the middle column, write each station's Guide
(VCR Plus+) number from TV Guide.
3 In the right column, write the channel number
your TV receives the station on.
EXAMPLE ONLY
Assigned Channel no,
Broadcast or Guide your TV
Cable (VCR Plus+) | receives the
Station Name | channel no. station on
DU at
-800-211-PANA(7262).