Panasonic Omnivision PV-9451 - Tape Position Display Function; Remote Warning Feature Control; VCR Lock Mode Operation

pecial VCR Features
A check list before you begin.
Tape Position Display Feature
To
find
out
the
present
tape
position.
a
paleta
mada:
(000
Pages
425.)
Tape
position
cannot
be
found
for
C-Cassette
type
and
tape
DO
Vis
Area
ps
ini
of
less
than
60
minutes.
(CH
3
or
4).
1 ABE Detect Tape Position.
O Press TAPE POSITION.”
-_-——_—— nn SSeS
* Detecting tape position is only
when first cassette in.
DETECTING TAPE POSITION | * It takes several seconds for
correct indication to appear.
* Indication is standard.
Model PV-9451 VCR
is shown here.
r
SELECT/
DARA
pel
BEGIN END . APLAY
W:STOP
A e > :FF
TAPE Return to normal
oe: screen. a ACTION
e Press TAPE POSITION. z
d
Remote Warning ON/OFF Feature
if Multi-brand feature is used (page 18),and this feature is set to on, a waming
appears whenever an invalid key is pressed in TV, DSS, or Cable mode.
a Display menu.
Press ACTION,
b
{
. TAPE
2 POSITION
Model PV-9451
remote is
Display SET UP VCR.
shown here.
1) Press AY to
SECA selec.
SET UP CHANNEL ” 2) Press P to VCR Lock Feature
1D
1
OMA
/
LANGUE:
ENGL
|
SH
.
;
z
,
SELECT:A
Y
KEY
display.
Ail
operations
are
prohibited
except
timer
Seb NEN recording and tape eject. Useful for families with
small children.
SET UP VCR Set ON or OFF. all A
n Stop mode,
TIME
STAMP.
1)
A
lO
VCR
LOCK
ACTIVATED
hold
down
REC
on
the VCR without a
cassette inserted
for 7 seconds.
REMOTE WARNING
AUTO SHUT-OFF
2) Press P to set.
SELECT:4 Y KEY
SET :» KEY
END ¡ACTION KEY * “OFF” --> none rallada Pes To turn OFF:
not appear even i
invalid key is pressed. Repeat above.
VCR LOCK OFF
Return to normal
screen.
Press ACTION twice. e VCR Lock is canceled automatically after 24
hours if clock is set.
For assistance, call 1-800-211-PANA(7262)