4
Press CH • Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically. If the setup is
completed, the following screen is
displayed.
If AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET procedure on page 9.
POWER-
ACTION-
M
_o O(D (D
oo@
Lee
.SELECT/
SET
A:CH UP
v:CH DOWN
)':VOL UP
'4:VOLDOWN
Note to CABLE System Installer I
This reminder isprovided to call the CABLE (Cable TV) System Installers attention to
I
Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies thatthe cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
11
To Next Page
Loading...
