These displays will alert you of a missed operation or provide further instructions.
[e].-]s] [_11t][it;_
• If no active channels are found for
CHANNEL MEMORY... 8 - 11
• If you attempt to set or review a Timer 8 - 13
Recording, or set the On-Timer and the Clock
is not set...
• If you press REC, and a cassette is inserted 4, 14
with no record tab...
• If you press STOP during a Timer 23
Recording...
• If you press PLAY, FF, REW, or REC 14
without a cassette inserted...
• If the unit is not in Stop mode or a cassette
with record tab is not inserted two minutes 22, 23
before a Timer Recording is about to begin...
• If head cleaning becomes necessary while
playing back a tape... 37
• If you press a function button other than 27
STOP/EJECT or POWER while the unit is in
VCR Lock mode...
36
To Next Page
Loading...
