This unit can be set to automatically power on in one
of 3 modes (TV, Playback, or FM radio.)
You can also combine the On-Timer with a one
minute alarm that gradually increases in volume.
Press PROG
to display SET PROGRAM screen.
2
1)Press AT to select
"ON TIMER."
2)Press I_ to display
ON TIMER screen.
(_ll' Ready Check List
_] The c_3¢k is set to correct time.
3
1)Press &T to select
desired settings.
2) Press I_ to set the
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is
•ON-TIMERmode inserted ifPlaybackmode
se)ectionorder isselected.
I_CH02_CH03"'"'CH125"_ "See "FM Radio" on page
c_ol F'LAY 21 for instructions on
t_F=t_9DFMtI....._ _ how tOpreset FM
stations.
4
Press AT to select
ALARM "ON" or "OFF."
I I
CH &_' ONTIMER
Indicator
When "ON" Is selected,
an alarm will gradually increase in volume for one
minute or unti_canceled by pressing any button
(including VOL + -).
To Make Corrections,
use &V and • I_ to move back and correct.
Press PROG
to set ON TIMER.
• "ONTIMER lindicatorlightsontheunit.
Q
To Cancel ON-TIMER set,
RepeatstepsI and2.Than,pressA_D/DLT toclear
the time instep3. Now,pressPRO<3toend.
"ON TIMER END"brieflyappearson-screen.
If no button on the remote or unit
t_ncluding a button used to turn oft
e alarm) is pressed within 60
minutes after unit turns itsetf on, it
wiffturn itself back off.
To Next Page
Loading...
