Connections you'll need to make. Recording(Editing) unit
Playing (Source) VCR
AUDIO VIDEO
1
Insert pre-
recorded tape.
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
Select "LINE" mode.
See "Selecting Input Mode" below.
3 _ Press PLAY then 6 '_ Press REC, then
PAUSE at starting PAUSE/SLOW
point tO put in immediately to put in
Standby mode. Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY
to start dubbing.
PressSTOP
to stop dubbing.
p/_FJ_LOW
G)
STOP
®
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubb ng.
rized exchanging l
pying of copyrighted
s may be copyright
ent.
Method 1:
Press CH &V. The display will change as follows.
1""_2(_A3BLE) (TV)
Method 2: _ILINE--I_
a Press ACTION for MAIN MENU.
b Press ,iV<l • to select "TV", then press ACTION
for SET UP TV screen,
c Press 4.V to select "INPUT SELECT," and
then press • to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
15
To Next Page
Loading...
