• Connect the OUT Jack on your cable box to the VHF/UHF
terminal on unit with an RF cable.
UNIT
WARNING:
When using "Nut type" RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.
Cable TV
Converter Box
VHF/UHF
1
2
Press POWER on the
remote or unit.
When the unit is turns on the
first time, SELECT
LANGUAGE screen appears.
• Turn on your cab|e box and set it to
PBS(PublIc Broadcast Station) channel
In your time zone. If you use DSS
receiver, it must be turned off.
10
3
Press CH • to select English.
OR
Press CH • to select Spanish
(Espa_ol).
OR
Press VOL + to select French
(Fran_ais).
CHANNEL/CLOCK AUTO SET
screen appears.
• If wrong language is set,
complete "Reset all unitMemory
Functions" steps page 9.
To Next Page
Loading...
