4
Press CH • Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
automatically, tf the setup is
completed, the following screen is
displayed.
If AUTO CLOCK SET IS
iNCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET procedure as below.
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
SET
A:CH UP
v:CH DOWN
:VOL UP
4_VOLDOWN
Press ACTION Key on the Remote
to display SET CLOCK Menu screen.
Press • • to select the month and
press _" to set. In the same manner,
select and set the date, year, time,
and DST. (DaylightSaving Time)
3
Press ACTION Key twice to start
CLOCK and exit.
When moving unitto a new location, or if
mistake was made in the Initiat.Setup
section,
• Make sure a tape is not inserted in the uni
Turn tf_e un(t
Power on.
2Press and hold both PLAY ant
FF on the unit for more than 5
seconds.
• The power willshutoff.
• Please ignoreNO CASSET-FE
warning.
A
_,_Do "Initial Setup" on page 8.
To Next Page
Loading...
