ICancel a Timer Recording: 1
(Recording is in progress) /
Holddown STOP for a few seconds | -4
to cancelthe "i3merRecording. |
• Anyfuluredaityorweektyracordings1
willbe perfomledasprogrammed. J
Repeat steps 1 and 2 on page 22.
Press AV to select
the desired program.
To Replace program...
_oooi
0000_
-ADD/DLT
SELECT/
SET
A:CH UP
v:CH DOWN
!_:VOL UP
4:VOLDOWN
-PROG
-STOP
1) Pressl_ to display.
2) Press AV to select
and press ,< or I_
to set new program
contents.
3) Press PROG
(or ACTION).
To Clear program,.,
Press ADD/DLT.
Press PROG twice (or ACTION) to exit
this mode.
• 2 minutes before Timer recording isperformed,
"PLEASE PREPARE FOR TIMER REC" appears
and/or the PROG TIMER Indicator flashes.
Be sure a cassette with record tab is loaded and the
unit is in Stop mode.
• If the start times of two programs overlap, the lower
numbered program will have priority.
• If the start time for a Timer Recording comes up
during a normal recording or One Touch Recording
(page 14), the Timer Recording will not be
performed.
• If there is a power interruption of more than one
minute, the recording may not be performed or
continued.
• If "INCOMPLETE" appears after all items have been
set, check all entries and make necessary
corrections.
23
To Next Page
Loading...
