This unit writes program data (see example
below) for about the first 10 seconds of every
recording. The information is then displayed
about 10 seconds after playback begins.
Press ACTION
to display MAIN MENU.
2_ 1)Press &Vd I_
to select =VCR."
2) Press ACTION
to display SET
UP VCR screen.
_PReady Check List
liThe clock is set to correct time.
nThe record tab is in place.
1) Press &T to
select TIME
STAMP.
2) Press I_ to set
"ON" or "OFF."
• When=OFF"Lsselected,theprogramdata
iswnttenonthetape,butwillnotbedisplayed.
Press ACTION twice
to return to normal screen.
<Time Stamp Example >
NormaV One
Touch Recording
Timer Recording
When Clock isnot set...
To Next Page
Loading...
