Panasonic Omnivision PV-V4601 - Record on a Tape

Record on a Tape mn on soos cover
the remote and try the button again.
IA. ready Check List
O All connections are made (pg. 8, 10, 24).
O TV and VCR are plugged in.
O TV is on and tuned to CH3, 4, or VIDEO.
U Remote is in VCR mode. (Press VCR)
Insert a tape with rec. tab (pg. 4).
* VCR power comes on.
STOP “VCR” lights on Multi Function Display.
Press CH AY, or number keys
to select channel.
* For “LINE” input, see pg. 32.
* For channels over 100, press 100 key then
SPEED press the remaining 2 digits.
CHA
3
Press
SPEED
to
select
record
speed
(pg.
4).
SP
=
Standard
Play
LP
=
Long
Play
SLP = Super Long Play
* Speed appears on-screen and on Multi Function Display.
Press REC
to start recording.
O
Le
tu
=
pe)
=
o
-
* To edit out unwanted scenes, press PAUSE/
SLOW to pause, and again to resume recording.
F : * You cannot view another channel during recording.
Record using VCR controls
Press STOP
1 insert a tape. to stop recording.
2 Select l E One Touch Recording (recording in progress),
Channel. * VCR shuts off after preset record length.
--> each press of REC adds 30 min. to
record length up to 4 hours.
lg] Record one station, watch another,
--> press VCR/TV ("VCR" goes out on Multi
Multi Function Function Display),
Display - select channels at TV (recording
continues). i
4 Press REC 5 Press STOP. «Watching one channel and
to start uero | CD 9 ne
recording another is NOT
Recording.
stop.
possible
when
using
a
Cable
: Box or a Satellite Receiver.
This video recorder, equipped with HQ | BI Select channels at VCR,
(High Quality) system, is compatible -» press VCR/TV ("VCR" lights on Multi
with existing VHS equipment. Only use Function Display),
tapes with the mark. Only tapes --> select channels at VCR.
tested and inspected for use in 2, 4, 6,
and 8 hour machines are * After 5 min. in Pause mode, VCR stops to
recommended. -
protect tape and video head.
15