Panasonic Omnivision PV-V4601 - Timer Recording

Timer Recording
EVA Ready Check List
O At! connections are made (pg. 8, 10, 24).
C TVandVCRpluggedin andtumed on.
L1 VCR/TV selector set to “VCR.” _
O Clock set correctly.
O Tape has rec. tab (pg. 4).
Power O Remote is in VCR mode. (Press VCR)
SEI Press PROG/VCR+ button’
A:PLAY to display PROGRAM.
W:STOP
«:REW
b:FF Press v
; JA to display Program
PROG/ screen.
VCR+ SELECT: à "4b
1) To set record DATE,
press AY to select:
| 1~31= one time, or
SELECT START DATE DAILY- MON- FRI, or
setect:ay
ser
||
WEEKLY=
same
time
each week
and press P to set.
e See selection order
below teft.
@ C
ua vx cm Fi rec
€»|C Ok
Example
joo
M=
1
=
2r
—
2)
To
set
remaining
, ^ items, press AY to
Today — 7 SELECTA /W Selection Order DAILY select and press P to
WEEKLY |... weekly, wey, _) set START/ STOP times,
C) MOM: CH(channel) or LINE
input (pg.32), and tape
speed (SP, LP, SLP).
Press PROGWCR+ button
* |f you are using a Cable Box, VCR to end the program.
Timer Programming
Channel(Step 3) must be set to To Enter More Programs
y HE PROG ,
the Cable Box output channel
AND your Cable Box must be
manually set to the desired
press AY to select and
press » to set an unused
Ln
'P DT STAH STOP
13 2 007 3 20?
7 ;
channel. The Cable Box power | es gaan Program number and
left on. SELECT ay SET:» repeat step 3.
* if a power Interruption occurs Or
while programming the timer, the ; Press PROG/VCR+
timer program(s) may be canceled. button again to exit...
If “TIMER PROGRAMS WERE LOST 000
DUE TO POWER INTERRUPTION” Press POWER off
appears on-screen, please reenter to set the timer. :
the timer programs. ("TIMER" lights on Multi Function Display.)
For assistance. please call : 1-800-211-PANA(7262) or send e-maii to : consumerproducts@panasonic.com