Panasonic Omnivision PV-V4601 - Page 24

1avancea
Connections
Audio/Video Connection
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR to
them to receive higher quality picture and sound.
VIDEO IN
(D CODE the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of
your TV.
Connect the "L" and *R" AUDIO OUT terminals on the VCR to the "L" and "R"
AUDIO IN terminals of your TV.
O) Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
Bi With a Cable Box (VCR => Cable Box)
* view any * record
oe TV (including scrambled
, ANT AÚDIO I scrambled) channels.
I or i O D A channel.
` CATV,’
‘se? Cue i ourroTv EINE T * use VCR Remote
O O E Control to select
IN1
channels
without
using
Multi-brand
VCR control feature.
VCR
* record and view | * view channel
AUDIO — INFROM ANT both scrambled other than the
O O and unscrambled one selected
channels if for any type of
additional recording.
equipment is
added. This * doaTimer
connection recording of a
requires: two channel unless
converter boxes, you select it at
an A/B switch, the cable box.
and a 2-way
splitter.