Panasonic Omnivision PV-V4611 User Manual

VCR & Cassette Information
Playing older or damaged tapes may Power Source: 120 V AC, 60 Hz
eventually
cause
video
heads
to
Power
Consumption:
PowerOn
become
clogged.
Approx.
23
watts
Power Off
Video Head Clog Sensor Approx. 3.0 watts
During
playback,
this
Video
Signal:
EIA
Standard
NTSC
color
screen
appears
if
Video
Recording
System:
4
rotary
heads
helical
clogging
is
detected.
|
NERD
cLeanina
o
scanning
system
To
remove
screen,
PLEASE.
INGERT
HEAD
Audio
Track:
1
track
(Normal)
press
PLAY
on
the
|
“Tet
MANIN
2channel
(Hi-Fi
Audio
Sound)
remote
or
VCR.
Tuner:
Broadcast Channels: VHF 2~13, UHF 14-69
CABLE Channels: Midband A through 1 (14-22)
Superband J through W (23-36)
Hyperband AA~EEE (37-64)
LowbandA-5-A-1 (95-99)
Special CABLE channel5 A (01)
Ultraband65-94, 100-125
Operating Temperature: 5°C~40°C (41 °F~104 °F)
= Operating Humidity: 10%-75%
Weight: 2.7 kg (6.0 lbs).
Dimensions: 430 (W) x 98 (H) x 242 (D) mm
16-15/16" (W) x 3-7/8” (H) x
9-9/16" (D)
Note: Designs and specifications are
subject to change without notice.
Features for a Quality Picture
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce
noise)
° Use “dry” type head cleaning
cassette only. (Part No. NV-
TCL30PT is recommended.)
* Follow cleaning tape instructions
carefully. Excessive use of tape
can shorten head life.
* if head clog symptoms persist,
contact your nearest Factory
Service Center or authorized
Service Center. (See page 32.)
Cleaning the VCR
Use a soft cloth or dusting
icture
attachment of a vacuum cleaner to
remove dust from the ventilation
holes on the back sides and bottom
of the cabinet.
Plastic surfaces are easily
scratched and can be marred by
alcohol and various solvents. Avoid
excessive use of oil-based furniture
polishes since the materials used in
the cabinet will accumulate more
dust. We recommend using a
nonabrasive, antistatic cleaner and
polisher.
Use during Playback and Slow Motion mode to
reduce picture noise. Press CH (TRACKING)
A / Y buttons on the remote control or on the
VCR until the picture clears up. To return to Auto
Tracking, press POWER off, then on again a few
seconds later.
V-Lock Control (to redu icture jitter
In Still mode, CH (TRACKING) a / Y buttons
operate as a V-Lock control.
5
=h
O
+
3
pa)
=
O
=
29
Inoq 104

Panasonic Omnivision PV-V4611 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4611
Category	VCR
Language	English