Panasonic Omnivision PV-V4611 User Manual

On-Screen Displays (OSD)
Function & Channel Display Blank Tape/ No Video
Signal Indication
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
When a function
button is pressed, e.g.
PLAY, or you change
channels, a 4 second signal with the Weak Signal Display
display appears first Feature (page 27) set to OFF, the TV
in large and then screen will turn solid blue.
small characters.
Function
Status
Current
Time
Channel
VCR Status &
Clock Display Rec Time Remaining
{OTR mode only,
REC 12:00AM ABC
Counter
To
display
or
see
page
15.)
_
remove
overlay
at
right,
Broadcast
Audio
Tape Speed
-->
press
DISPLAY.
Being
Received
(See
page
4.)
i H i These displays will alert you to a missed
Warning and instruction Displays operation or provide furt er instructions.
| OSD _ | Caution___ [Pg] OSD | Caution [Pg]
NO CH FOUND If you press POWER
or STOP during a
Timer Recording...
(visible in VCR
mode only)
VIDEO HEADS MAY
NEED CLEANING If head cleaning
PLEASE INSERT HEAD becomes
TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY
lf no active channels
are found for
CHANNEL
MEMORY...
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PRESS CH UP KEY AGAIN
If you attempt to set
or review a Timer
Recording and the
Clock is not set...
PLEASE SET CLOCK BY
CLEANING CASSETTE necessary while
OR REFER TO MANUAL | playing back a
PRESSING ACTION KEY
If you press a
After
a
Timer
function
button
TURN
rere
Program
has
other
than
STOP/
|
57
FOR
TIMER
RECORDING
or
POWER
been
set...
An
while
the
VCR
is
in
VCR Lock mode...
If you press an
invalid key on the
remote while in
CABLE/DSS
mode...
If you press REC on
CHECK CASSETTE the remote control or
RECORD TAB VCR, and a cassette
is inserted with no
record tab...
If you press PLAY,
FF, REW, or REC on
the remote control or
VCR without a
cassette inserted...
USE VCR : YCR KEY
USE T¥ : TV KEY
VCA LOCK ACTIVATED
. REMOTE CONTROL IS SET
14
15
TO CABLE/DSS MODE
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
REMOTE CONTROL IS SET
If you press an
TO TY MODE
invalid key on the
remote while in
TV mode...
USE VCR : VCA KEY
USE CABLE/DSS : CABLE/DSS

Panasonic Omnivision PV-V4611 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4611
Category	VCR
Language	English