The underlined settings are the factory mode settings.
List of setting menus (continued)
108
OPTION MENU screen
If [MENU/MODE CHK] is pressed with held down on the normal display screen, OPTION MENU is
displayed on the setting menu.
Item Description of settings
1394 STATUS
The 1394 status display sub-screen is displayed.
FORMAT:
Format of the input or output signals
RATE:
Transfer rate of the input or output signals
60/50:
System of input or output signals
CH:
Value of the channels whose signals are input or output
SPEED:
Transfer speed of the input or output signals
STATUS:
Status of the signals which are input or output by the IEEE1394 digital interface
VIDEO:
Status of the input or output video signals
AUDIO:
Status of the input or output audio signals
1394 CONFIG
This is the 1394 expansion menu.
DFLT:
For normal operation, keep this setting.
1-255
To Next Page
Loading...
