47
Playback
Setting to add meta-data
Make the setting to load the meta-data upload file onto this unit
■ SelectthemethodtorecordUSERCLIPNAME
Set the recording method of USER CLIP NAME.
1 Display the thumbnail display screen.
2 Press [MENU/MODE CHK].
3 With cross cursor operation, move the cursor to “META DATA”–“USER CLIP NAME”.
4 Move the cursor to “TYPE1” or “TYPE2” and press .
Recording method USER CLIP NAME to be recorded
Use clip meta-data
TYPE1 Loaded meta-data setting value
TYPE2 Loaded meta-data setting value + COUNT value
Not use clip meta-data
*
TYPE1 The same as GLOBAL CLIP ID
TYPE2 The same as CLIP NAME
*
When the meta-data upload file has been loaded, but “META DATA”–“RECORD” is “OFF”
5 Press [MENU/MODE CHK] to end the procedure.
(Continued on the next page)
To Next Page
Loading...
