Panasonic P50GT30 - Remove the SS-Board; Remove the SS2-Board

26
9.11. Remove the SS-Board
1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cable (SS53).
4. Remove the screws (×4 , ×4 ) and remove the SS-
Board.
9.12. Remove the SS2-Board
1. Remove the Terminal metals and the Shield metals. (See
section 9.5.)
2. Remove the SS-Board. (See section 9.11.)
3. Disconnect the flexible cables (SS54 and SS56).
4. Remove the screws (×2 ) and remove the SS2-Board.
9.13. Remove the Fan
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3 ).
3. Remove the Relay connector and remove the Fan.
9.14. Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3 , ×6 ) and remove the SP
shield metal L.
3. Remove the screws (×3 , ×6 ) and remove the SP
shield metal R.
4. Disconnect the Relay connector.
5. Remove the screws (×2 each) and remove the Speak-
ers (L, R).