Panasonic Palmcorder Multicam PV-DC152 - Special Features - Playing Back from Memory Card; Playing Back Still Pictures and File Selection

36
Playing Back Files from the Memory Card
It allows you to play back files recorded on a Card.
ª Playing back Still Pictures
1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
≥The still picture that was recorded last on the Card is displayed.
2
Start Playback.
1: Starts Slide Show (The [SLIDE!] Indication is displayed)
5: Playing back the next Picture
6: Playing back the previous Picture
∫: Stop the slide playback
;: Pause slide playback
ª To Select a Desired File and Play it Back
After setting the Palmcorder to the Card Playback Mode.....
1
Press the [MULTI] Button.
≥The files recorded on the Memory Card are displayed in Multi-Picture
Mode.
1
2
Rotate the [PUSH] Dial and select a desired file.
≥The selected file is marked with a red frame.
≥When 7 or more files have been recorded, turn the [PUSH] Dial to
display the next file. The [6] Button or [5] Button can be used
instead of the [PUSH] Dial.
3
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
2
File Size
3
File Number
4
Folder-File Number
ª Using File Search Mode
1
11
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
≥The file search screen
5
appears.
2
22
2
Rotate the [PUSH] Dial to select the desired number of the
file and then press it.
≥The selected number’s file appears.
≥The same process can be performed using the short-cut menu (l 18).
≥For other notes, see page 59.
CAMERA
VCR
CARD
P.B.
O
F
F
O
N
M
O
D
E
1
2
SEARCH
BACKLIGHT
FADE
CAMERA
STILL
SEARCH
100-0012
1
1
5
34
PICTURE
No.25 100-0012
2
640
640
640
640
640
640
PICTURE SEARCH
PRESS MENU TO RETURN
1
2, 3
2
M
E
N
U
MULTI/
P-IN-P