Panasonic Palmcorder PalmSight PV-L757 - Date and Time Setting

Setting the Clock
Setting the Date and Time
Before you begin...
7 : : * Connect the Palmcorder to a power source.
Mead time Is calculated, including, Set the POWER switch to VCR or CAMERA.
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation, none of the CLOCK
SET UP/DOWN, (A/Y) or DISPLAY buttons
are pressed within 30 seconds.
ponejs Bulyey
1 Press CLOCK SET UP A to display
the CLOCK SET menu.
2 Press UP A or DOWN Y repeatedly
to select BEN
3 Press DISPLAY to display the
DATE/TIME SETTING menu.
4 oos UP A or DOWN Y repeatedly
(or hold down) to enter the desired
numbers, then press DISPLAY to fix
that portion and move on.
EXAMPLE
LP, Vues \ le [
-5:00:00
XN ^
PM- 600700PM
JAN 1 1996
: 0 &P M-
go JAN'T 1996
Adjust the flashing digits for the hour,
minute, month, day, and year.
`=- DATETIME SETTING ---
4 2200:08AM-
JAN 1 1996
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
When you finish setting the year, the
clock starts operating, ahd the CLOCK
SET menu appears.
To exit from the CLOCK SET menu,
press DOWN Y to select ESIN], and
then press DISPLAY.
13