Panasonic Palmcorder PalmSight PV-L757 - Copying Your Tapes (Dubbing)

Copying your Tapes (dubbing)
Main Operation
Before you begin...
«
Connect
the
Palmcorder
to
VCR
as
shown
1
Insert
a
pre-recorded
tape
below.
: into the Palmcorder and a blank
* Turn ON both units.
*
Set
the
recording
VCR's
Input
Signal
VER
e
is
TRUM
YOUE
Selector to LINE. i
. Set the Palmcorder POWER
switch
to
VCR.
2
Press
PLAY
on
the
Palmcorder
and
when you find the starting point, press
STILL.
3 Press PLAY and REC together on
your VCR and then immediately
Source (Playing) press STILL/PAUSE.
Palmoorder
AUSE/STILL STOP AEW PLAY FF REC
VCR Buttons
A osse STILL on the Palmcorder
and press STILL/PAUSE on the
VCR to simultaneously start both
units.
Audio/Video Out
. TV
(To View)
Audio/Video Cable
(supplied)
$31n]83y4 ¡e1939d
VHF
Connecting
Cable
5
Press
STOP
on
both
units
(not
supplied)
when
dubbing
is
complete.
Recording:
Note:
* Tapes recorded on other VCRs and used
for playback in the Palmcorder must be
recorded in SP or SLP mode.
e For technical reasons, dubbing a tape may
reduce its quality.
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
To Video In
Monitor with your TV
. * Turn the TV ON and select its VCR
channel (CH3 or CH4).
* Set the VCR/TV Selector on the
recording VCR to VCR.
37