Panasonic Palmcorder PalmSight PV-L757 - Digital Electronic Image Stabilization System; Negative;Positive Transposer; Eene Neant Ener Nnne Nnne Tne Nnne

Special Features
Digital
Electronic
Image
Before
you
begin...
Stabilization
System
*
Set
the
POWER
switch
to
CAMERA.
This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
1 Press the EIS button to activate the
Digital E.1.S. function. ("EIS" will
appear in the EVF.)
* The image in the EVF will be
enlarged slightly and the shutter
speed will automatically adjust from
1/80 to 1/250 according to the
brightness of the subject.
2 Press the EIS button again to cancel.
* You may also use the High Speed
Shutter function (from 1/100 to 1/
10000). The shutter speed you select
remains active even after you cancel
the Digital E.1.S. function.
* Be sure that the Digital E.l. S. is
turned off when not in use.
Digital E.1.S. may not function
when...
» Palmcorder movement is too ex-
treme.
* recording a subject with distinct
horizontal or vertical stripes.
* recording in low light situations.
» EIS indicator flashes when the light
level is inadequate.
* recording a subject under intense
fluorescent light.
e recording a scene with very fast
motions.
Before you begin...
* Set the POWER switch to CAMERA.
o
y
©
2
=
T
©
c
ma
C
=
©
0
Negative/Positive Transposer
This special effect feature allows you to change
the picture from a E to a negative image.
Press NEG/POS to view or record a
negative image.
Press again for norma! recording.
33