Panasonic Palmcorder PalmSight PV-L757 - RE EPI ELI Nan en Pan Aer Taati

Special Features
Motion Securtty
Great for amateur surveiliance applications.
Motion Security recording may start
regardless of subject motion when...
* the background is plain, such as a white
wall.
¢ the Palmcorder is pointed at something
with distinct horizontal, vertical or oblique
stripes, such as a window shade.
* the brightness suddenly changes.
Motion Security recording may not start
when...
* motion is very slow or very fast.
* moving object is very small.
* motion is in 1 corner of the viewing area.
* In low light situations (MOTION
SECURITY will flash if the light level is
inadequate.)
* the background has distinct horizontai or
vertical stripes.
* the background is plain, such as a white
wall.
34
Before you begin...
* Connect the Palmcorder to a power source.
For extended Palmcorder use, it is recom-
mended to use the AC Adaptor as a power
source.
¢ Insert a cassette with record tab (see page 10).
* Set the POWER switch to CAMERA.
+ Alm Palmcorder at desired area.
I In Record/Pause mode, hold down the
SECURITY MODE button for
approximately 2 seconds to place the
Palmcorder in Motion Security Stand-
By mode. (If no cassette tape is
inserted, "Ea" will flash.)
MOTION
SECURITY
ETANDAY
* Palmcorder will start recording
approximately 3 seconds after motion is
detected.
* |f you display the date and time (see page
15), the date and time will also be
recorded.
MOTION
SECURITY
* Recording will stop 30 seconds after the
motion ceases.
2 Press the SECURITY MODE button
once to cancel the Motion Security
feature.
Note:
* Make sure the Palmcorder is firmly secure. If
the Palmcorder is moved, the Motion Security
feature will start, regardless of the subject
being recorded.
* Paimcorder cannot be placed in the Motion
Security Stand-By mode during recording.
* Record/Pause, Stand-By mode, Digital E.I.S.,
Color Digital Fade, One-Touch Auto Fade and
Negative/Positivo Transposer can not be
activated while Paimcorder is in the Motion
Security Stand-By mode.