Panasonic Palmcorder PalmSight PV-L757 - Camera Recording; Basic Recording Steps

Camera Recording
Simple Recording Before you begin...
* Connect the Palmcorder to a power source.
* Insert a cassette with record tab (see page 10).
1 Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
Record/Pause
mode.
2 With the Viewfinder Eye Cup
agalnst your eye, adjust the Vision
Adjustment Control to your eye-
sight.
3 Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
4 vs RECORD/PAUSE to start
recording.
The Tally Lamp and REC Indicator are
lit during recording.
WARNING:
* Do not leave the Palmcorder with the EVF
aimed directly at the sun as this may cause RECORD
damage to the Internal parts of the EVF.
Press the RECORD/PAUSE again to
pause the recording.
Set the Power switch to OFF aíter
recording is finished.
«To remove the cassette
In Record/Pause mode, slide the TAPE EJECT
Switch (refer to page 10).
* When your Palmcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a normal
characteristic of the CCD pick-up device. Try
to avold this when possible.
20