37
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST *1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
02 RESOLUTION *1 Standard Setting the home position of the RESOLUTION key.
2 Fine
3 S-Fine
04 STAMP
*1 Off
Setting the home position of the STAMP key.
To select the stamp function when document is stored in memory,
see Fax Parameter No. 28.
2On
05 MEMORY 1 Off Setting the home position of the MEMORY key.
*2 On
06 DIALING METHOD 1 Pulse
Selecting the Dialing method.
*2 Tone
07 HEADER PRINT
*1 Inside
Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
08 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2 From To
09 RCV'D TIME PRINT
*1 Invalid
Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received page.
2 Valid
10 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
12 COMM. JOURNAL
1 Off
Selecting the home position of printout mode for COMM. Journal
Off/Always/INC.
Off : No printout
Always : Always prints out
Inc. only: Printout when communication has failed.
2Always
*3 Inc. only
13 AUTO JOURNAL PRINT
1 Invalid
Selecting whether the machine prints the journal automatically
after every 32 transactions.
*2 Valid
15 IN MODE
*1 Tel
Selecting IN (attended) mode as either Telephone Mode or
Fax / Tel Auto Switching Mode.
2 Fax/Tel SW
16 OUT MODE
*1 Fax
Selecting OUT (unattended) mode as either Fax Mode or TAM
interface Mode.
2TAM I/F
Continued on the next page.
Customizing Your Machine
3
To Next Page
Loading...
